MAINTENANCE 4
21
4.13 MUFFLER AND EXHAUST ___________________________________________________
To protect from carbon monoxide poisoning, inspect the
complete exhaust system regularly and always replace a
defective muffler.
If you notice a change in the color or sound of the exhaust,
stop the engine immediately. Identify the problem and have
the system repaired.
Torque all exhaust manifold hardware evenly. Tighten or
replace exhaust clamps.
4.14 TIRES ___________________________________________________________________
1.
Keep tires properly inflated to prolong tire life. Check
inflation pressure while the tires are cool. Inspect tread
wear.
4.
Check the pressure with an accurate, low pressure
tire gauge.
5.
Keep tires inflated to:
Front - 10-12 psi - (69-83 kPa)
Rear - 8-10 psi (55-69 kPa)
4.15 WHEEL MOUNTING PROCEDURE ____________________________________________
1.
Remove dirt, grease, and oil from stud thread. Do not
lubricate threads.
2.
Position wheel on hub and inspect to insure full contact
between mounting surface of wheel and hub or brake
drum.
3.
Finger tighten all hardware then torque hardware in
criss-cross order; always tighten nuts in the top
position.
4.
Check and retorque daily until torque is maintained,
85-95 ft.lbs. (115-128 Nm).
4.16 ROLL OVER PROTECTIVE STRUCTURE (ROPS) ________________________________
A ROPS has been installed on this mower at the factory.
Inspect it periodically, and follow operating procedures
described in the Safety & Operation manual.
1.
Regularly inspect the seat, seat belt, mounting
hardware, and any accessories within the ROPS.
Replaced all damaged parts immediately.
2.
Once the ROPS has been subjected to any form of
impact, it should be replaced.
3.
Check and retorque all hardware. All replacement
components used for the ROPS must be as
specified in the parts list.
WARNING
Exhaust fumes contain carbon monoxide that is toxic and
can be fatal when inhaled.
NEVER operate an engine without proper ventilation.
!
CAUTION
Unless you have the proper training, tools, and
experience, DO NOT attempt to mount a tire on a rim.
Improper mounting can produce an explosion which
may result in serious injury.
!
WARNING
Make sure the mower is parked on a solid and level
surface. Never work on a mower that is supported only
by the jack. Always use jack stands.
If only the front or rear of the mower is raised, place
chocks in front of and behind the wheels that are not
raised.
!
CAUTION
Do not loosen or remove bolts; do not weld, drill,
modify, bend or straighten a damaged rollover
protection structure.
!
Содержание Super LF 1880 Fairway 67955
Страница 29: ......
Страница 60: ...32 2 2 10 3 3 5 6 7 8 9 10 12 12 11 11 13 14 4 4 4 4 1 LF 1880 2 1 Body Components Serial No All ...
Страница 146: ......
Страница 147: ......