Jacobsen R-311 ROPS Скачать руководство пользователя страница 7

August 2011© 

Jacobsen R-311 ROPS Operator Manual

 

 

9. Use your turn signals, checking for traffic well in advance of turningIf the utility vehicle is 

not equipped with turn signals and law requires them, install them prior to operating on or near 

public roads. 

 

 

Safety Decals 

 

1. Keep decals clean. Remove dirt with a wet clean cloth when necessary. 

2. Replace safety decals if destroyed, missing, painted over or unreadable. If any safety decals 

are covered or  obscured when the ROPS  is mounted,  it is recommended that you purchase 

replacement decals from the utility vehicle manufacturer. Mount them in a readable location 

at, or near, their original location before operating the utility vehicle. 

3. New ROPS decals and utility vehicle decals are available from your utility vehicle dealer. 

 

 

ROPS Safety 

 

1. Install the ROPS in accordance with Tektite mounting instructions. Failure to do so may affect 

the ROPS ability to withstand a roll over.  

2. If the ROPS is subjected to alteration, structural damage or involved in an over turn accident, 

the entire structure must be replaced. Failure to do so may result in injury or death in the event 

of a roll over. 

3. If the utility vehicle in not equipped with seat belts, purchase approved seat belts from the 

utility vehicle manufacturer or Tektite prior to operating the utility vehicle. 

4. Always fasten seat belts prior to operating the utility vehicle. 

5. Always operate the utility vehicle from the operator’s seat. 

6. Remove mud, crop residue, chains and tools from steps and operator’s platform. They may 

interfere with pedal operation or entry/exit from the utility vehicle. 

7. Remove all loose chains, tools, and equipment from the operator’s platform. Failure to do so 

may cause injury or death in the event of a roll over. 

8. Do not install the ROPS on a utility vehicle  model that the ROPS  is not designated for 

(compatible utility vehicle designations are printed on the ROPS serial number plate).  The ROPS 

is designed specifically for individual models to ensure ROPS requirements will be met. 

Installing the ROPS on a non designated utility vehicle may result in injury or death. 

 

 

Emergency Exits 

 

This ROPS has 2 exits, which may be used in an emergency: left and right side doors. 

 

 

 

Содержание R-311 ROPS












Отзывы: