Jacobsen G-Plex III, Руководство по запасным частям и обслуживанию, Страница: 10 / 144

GB-8
GB
JACOBSEN G-PLEX III Series: DN & DP
MAINTENANCE AND PARTS MANUAL
e m a N e n i h c a M
# # s e i r e S
n o i t a r e l e c c A m r A / d n a H
l e v e l
H R r o H L x a M
s / m s n o i t a r e l e c c A 2
q e A X q e A Y q e A Z
2 . 3 4 4 . 2 6 2 . 1
e u l a V t n a n i m o D 2 . 3
e m a N e n i h c a M
# # s e i r e S
y d o B e l o h W
n o i t a r e l e c c A
l e v e l
n o i t a c o L r o o l F
s / m s n o i t a r e l e c c A
2
n o i t a c o L t a e S
s / m s n o i t a r e l e c c A
2
x y z x y z
n a e M 4 3 2 0 . 0 9 9 4 0 . 0 9 0 1 . 0 0 5 0 0 . 0 5 5 2 0 . 0 1 6 1 0 . 0
4.5 VIBRATION LEVEL
The machine was tested for whole body and hand/
arm vibration levels. The operator was seated in the
normal operating postion with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
Standard ISO 5349: 1986 Mechanical vibration.
Guidelines for the measurement and the
assessment of human exposure to hand-
transmitted vibration.
Standard ISO 2631-1: 1985 Evaluation of human
exposure to whole body vibration -- Part 1:
General requirements.
4.8 CUTTING PERFORMANCE
Cutting Frequency
7-knife reel - 7.4mm at 6km/h
9-knife reel - 5.7mm at 6km/h
11-knife reel - 4.7mm at 6km/h
4.6 SLOPES
DO NOT USE ON SLOPES GREATER THAN 15°
The slope 15° was calculated using static stability
measurements according to the requirements of
EN 836.
4.7 RECOMMENDED LUBRICANTS
Engine oil:
Diesel: Should be to MIL-L-2104C
or to A.P.I. Classification CD
Gasoline: A.P.I. Classification SE/SF
Hydraulic Oil: GreensCare 68
Grease: Lithium based.
E R U T A R E P M E T Y T I S O C S I V L I O
) F ° 9 3 ( C ° 4 E V O B A 0 3 E A S
) F ° 9 3 ( C ° 4 W O L E B 0 3 - W 0 1 r o 0 3 - W 5 E A S