Jacobsen 672256G01, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 34 / 98

4 CONTROLS
en-32
WARNINGS
4.2.6.31 WARNING OIL-PRESSURE FAULT _________________________________________
When this screen is shown, the engine oil pressure has decreased below the
normal level. If this happens during operation, Stop the engine and check the
oil level. Top up if necessary. If the problem persists consult your service
dealer.
4.2.6.32 WARNING ENGINE OVERHEAT ___________________________________________
When this screen is shown, the engine temperature has risen above the
normal levels.
Park the machine in a safe area disengage cutting units, set engine to idle to
allow engine temperature to decrease prior to switching off the engine.
Clean the radiator and screens of all grass and debris.
4.2.6.33 WARNING CAN TIMEOUT ________________________________________________
This screen is shown if there is no CAN communication from the MCU for 3
seconds.
Stop the machine as soon as possible and contact your service dealer. Check
the armrest and controller harness connections.
NOTICE
The number in the top right of the screen indicates the total number of current faults recorded. If more than one fault,
it will cycle all current faults.
TST
™
9:25 AM 07/08/2017
12345.6 Hours
!
Engine Oil Pressure Fault
1/1
TST
™
9:25 AM 07/08/2017
12345.6 Hours
!
Engine Overheat Fault
1/1
TST
™
9:25 AM 07/08/2017
12345.6 Hours
!
MCU Com Timeout Fault
1/1