7
Jacobs Ladder LLC
jacobsladderexercise.com
(1) Elapsed Time
When the machine is in use, this field will display the elapsed time of the workout. When
the unit is not moving, this field will display “HOLD”.
(2) Distance in Feet
When the machine is in use, this field will display the total distance climbed in feet.
(3) Heart Rate
This unit is equipped with a wireless receiver located under the deck of the machine. This
receiver can detect signal from any Polar brand Heart Rate Device. When the display is on
and a users signal is detected, the heart rate will show in this field.
(4) Rate Ft/Min
When the display initially powers up, this field will say “150”. This is to say that a default
user weight of 150 lbs will be used to calculate calories burned. You can change the set
weight in 10-pound increments by swiping your finger over the reset sensor. You can
choose a weight from 100-330lbs.
Once a workout is started, this field will display the current speed that the user is
climbing in feet per minute.
(5) Calories
When the display initially powers up, this field will say “LBS”. This is to prompt the user to
input their weight if desired and will begin to display calories burned once the workout has
begun. If no weight is input, the unit will use a default weight of 150 lbs to calculate calorie
burn.
DISPLAY
