Jacob Jensen 80, Руководство пользователя

Страница: 14 / 32

To .register .a .new .handset
When you register a new handset to your base, you will be
asked to enter your base PIN code. To enable registration mode
on the base unit, press and hold the PAGE button for five
seconds. Before registration, make sure the new handset is fully
charged and that you have the base and the handset in front
of you. Also, make sure that all handsets and the base are in
standby.
On the handset you want to register:
Key Map:
Add . .Settings Register
select the base number
. Press to access the main menu.
. Press / to select “Add. Settings” and press
3. Press / to display “Register” and press
to confirm.
. Press / to select your base number and press
to confirm.
On the handset :
Enter the base PIN code. Pre-set base PIN code is 0000.
When in standby, the new handset number will be displayed.
The handset will automatically be allocated with the next
available handset number. If the registration is unsuccessful,
the display will show “Searching” and you will need to follow
the registration procedure again.
If you experience a need for extended transmission range, the
Telephone 80 is especially tested and prepared for use with a
RTX DECT Range Extender. See more info at www.bellxpress.dk.