Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
4
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
Ha (24 + 1 spare)
M6 Short Bolt
Hb (24 + 1 spare)
M6 Medium Bolt
Hc (24 + 1 sapre)
M6 Long Bolt
Rocker: 225 lbs
Hh (24 + 1 spare)
M6 Nut
Hg (4)
Lock Washer
Hd (4)
M8 Bolt
He (96)
M6 Metal Washer
Hi (4)
M8 Nut
Hf (4)
M8 Metal Washer
Hj (2)
Allen Wrench
Hk (1)
Open Hex Wrench
Hl (1)
Hex Wrench
