CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Your 5 piece cushion seating set is now ready to use.
5
Place the table top upside down on a non-abrasive surface.
Insert four table legs (K) into the plastic receivers on the
table top with rim (I). See Fig.9. Place the metal center
ring (J) between the legs and line up the holes. For each
hole insert a short bolt (La) through a metal washer (Le),
through the metal center ring (J) and secure into the legs (K).
See Fig. 10. Do not tighten completely. Repeat the same
procedure for the other three legs.
SIDE TABLE ASSEMBLY
6
Insert the screws (Lc) into each plastic receiver on the
table rim and secure into the tip of the legs. See Fig. 11.
7
Tighten all bolts and screws diagonally. Turn the side
table over.
8
Made in / Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179
SHOP
kmart.com
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free: 800-457-4652
Please refer to part numbers when reordering
K
I
J
K
Lc
Le
K
La
J
holes, insert a short bolt (La) through a metal washer (Le),
through the connector (D), through another metal
washer (Le) and secure into a nut (Lf). Do not tighten.
Repeat the procedure for the other side. See Fig.8.
Fig. 10
Fig. 11
Fig. 9
