Jackson AJX SERIES Скачать руководство пользователя страница 44

Страница: 44 / 102

07610-003-60-98-L

TROUBLESHOOTING

TROUBLESHOOTING

OBSERVATION

POSSIBLE CAUSE

REMEDY

Nothing on machine

operates. The power

switch is ON and the

power indicator light is

OFF.

1. Machine is not wired correctly

to incoming power source.

2. Machine circuit breaker is

tripped.

3. Service breaker is tripped.

1. Have an electrician verify wiring.

2. Reset the circuit breaker. If it trips again, contact an

electrician to verify the machine amp draw.

3. Reset the service breaker. If it trips again, contact an

electrician to verify the machine amp draw.

Machine will not fill. The

power switch is ON and

the power indicator light

is ON.

1. No water supplied to machine.

2. Machine doors are not

closed.

3. Incoming water solenoid valve

damaged/faulty.

4. Tank floats faulty.

1. Verify water lines have been connected to the machine.

2. Close doors completely.

3. Verify the valve is operating. If not, replace.

4. Verify the wiring of the floats. Verify that no debris is jamming

the floats. Replace if necessary.

Machine fills, but fill is

weak.

1. Low incoming water pressure.

2. Incoming water solenoid is

clogged.

1. Verify incoming water pressure during fill is 15 PSI.

2. Verify debris is not trapped in valve. If so, remove

debris.

Low wash tank

temperature.

1. Low incoming water

temperature.

2. Heater not energizing.

3. Low incoming voltage.

1. Verify the incoming water temperature matches the data

plate.

2. Verify the wash tank heater is operating. If not, replace.

3. Have an electrician verify incoming power is the same

as indicated on the data plate.

Low wash arm pressure,

poor spray pattern.

1. Clogged wash arm nozzles.

2. Clogged wash tank or wash

pump strainers.

3. Worn wash pump impeller.

1. Verify nozzles are not clogged with debris. If so, remove

debris.

2. Clean out strainers if necessary.

3. Verify status of impeller and replace if necessary.

Inadequate rinse.

1. Low incoming water pressure.

2. Incoming water solenoid is

clogged.

1. Verify incoming water pressure during fill is 15 PSI.

2. Verify debris is not trapped in valve. If so, remove

debris.

WARNING:

Inspection, testing, and repair of electrical equipment should only be performed by a

qualified service technician. Many of the tests require that the

machine

have power to it and live

electrical components be exposed.

USE EXTREME CAUTION WHEN TESTING THE MACHINE.

WARNING

Содержание AJX SERIES







































































































Результаты поиска

Содержание AJX SERIES

Отзывы:

Бренды по названию

Популярные бренды

Jackson AJX SERIES, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание AJX SERIES

Отзывы:

Бренды по названию

Популярные бренды