manualshive.com logo in svg

Jackson AJ-44, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Jackson AJ-44 Скачать руководство пользователя страница 32

24

07610-001-76-22-N

5.  As needed, clean the wash and rinse arms:

     a.  Remove wash arm manifolds.

     b.  Remove end-caps from arms and manifolds.

     c.  Clean nozzles with a brush.  Also clean rinse assembly nozzles.

     d.  Use a small wire or toothpick to remove remaining debris or lime deposits from  
              nozzles.
     e.  Flush arms with water.

     f.   Replace end-caps and ensure they have been tightened.
     g.  Replace wash arm manifolds.

The outside of the 

machine

 should be cleaned with a standard countertop or general 

cleaner. Do not attempt to clean inside any compartments, boxes, or chambers that are 
secured with a cover. These normally contain live electrical components.

CLEANING

Do NOT clean the 

machine with any type 

of metallic scrubbing 

sponge!

OPERATION

OPERATING INSTRUCTIONS

For machines with 

pre-wash sections, also 

remove and clean the 

pre-wash arm.

Содержание AJ-44





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды