Jackson 24P-NSU, Руководство по обслуживанию, Страница: 20 / 33

TROUBLE SHOOTING GUIDE
PROBLEM CAUSE SOLUTION
Heater switch defective. Replace.
Water level protection Replace.
control defective.
Heater element defective. Replace.
Wires loose or burned off. Retighten or Replace.
Rinse water not at required Thermometer's defective. Replace.
temperature range.
Heater switch defective. See page on heater system
checkout.
Thermostat defective. Adjust using Instructions on
thermostat page and heater
system's checkout page.
Replace it necessary.
Defective neater relay on If defective, replace. See note
. contactor. on heater system above.
After filling machine with Overflow-drain clogged. Clean away obstruction.
water. leakage began at
lower front panel without
machine operating or at and
of rinse cycle.
Machine doesn't drain when Drain solenoid clogged. Remove obstruction.
drain switch is depressed.
Defective switch. Replace.
Defective motor or Replace.
motor start relay.
Defective drain solenoid. Replace.
Note: The drain pump of this machine is part of wash motor, so if wash motor operates property drain system should work.
16