manualshive.com logo in svg

Jackson Labs Micro-JLT GNSS, Руководство пользователя, Страница: 37 / 83

Поделиться
Скачать
Jackson Labs Micro-JLT GNSS Скачать руководство пользователя страница 37

© 2019 Jackson Labs Technologies, Inc.

31

Micro-JLT GNSS™ User Manual

3.5.9 PTIMe:LEAPsecond:DATE?

This command returns the date of the pending leap second, if any.

3.5.10 PTIMe:LEAPsecond:DURation?

This command returns the duration of the last minute of the day during a leap second event. The 
returned value is 59, 60 or 61 if GPS Almanac data is available, and 0 otherwise. A response of 60 
indicates that no leap second is pending.

3.5.11 PTIMe:STAMp Subsystem

This subsystem is unrelated to OCXO disciplining. For more information on OCXO disciplining, 
please refer to Section

3.6

.

The commands below are implemented for time-stamping management of GPS and external PPS 
sources. The PPS input pins are shown in 

Figure 3.1

.

PTIMe:STAMp:MODE <OFF|ASYnc|MEMory|OUTput|DIFFer> 
PTIMe:STAMp:SOURce <GPS|EXTernal|ALL>
PTIMe:STAMp:DIFFer <ALL|EXT|GPS> 
PTIMe:STAMp:FILTer [OFF | REL | DUR | PPS] 
PTIMe:STAMp:FILTer:PPSecond <int> [1,100] 
PTIMe:STAMp:FILTer:1PPeriod <int> [1,604800]
PTIMe:STAMp:LAST? 
PTIMe:STAMp:MEMory?
PTIMe:STAMp:RESET
PTIMe:STAMp?

Figure 3.1 Micro-JLT GNSS™ PPS Input Pins

Содержание Micro-JLT GNSS




















































































Отзывы:

Нет отзывов