background image

 

Propane Gas Connection: 

 

 

 

Fuel Source:

 The following instructions are for a Propane Equipped grill ONLY.

 

 

 

Hose & Regulator:

 Use only the propane hose and regulator supplied with your Propane grill. 

  

 

 

 

Installation Codes: 

The installation of this  appliance must conform with  local  codes or, in the absence of local 

codes, to the National Fuel Gas Code, ANSI Z223. 1 or CAN/CGA-B149.2 Propane Installation Code.

 

 

 

Propane Cylinder Requirements & Specifications: 

 

1. 

Maximum Cylinder Size: 20 lbs. (9 Kg) 

2. 

Measurement: (approximately)   Diameter: 12’’(30.5cm)  X  Height: 18” (45.7cm):  

3. 

USA: All LP cylinders used with this grill must be constructed and marked in accordance with the 

Specifications 

for  LP  (Propane)  Gas  Cylinders

  of  the  US  Department  of  Transportation  (D.O.T.).  Refer  to  your  propane 

cylinder collar for markings. 

4. 

CANADA: All  propane  cylinders  used  with  this  grill  must  be  constructed  and  marked  in  accordance  with  the 
National  Standard  of  Canada,  CAN/CSA-B339; 

Cylinders,  Spheres  and  Tubes  for  the  Transportation  of 

Dangerous Goods and Commission.

 Refer to your propane cylinder collar for markings. 

5. 

Cylinder supply system must be arranged for vapor withdrawal. 

6. 

Cylinder must be equipped with a collar to protect the outlet valve.  

7. 

Cylinders  must  be  rust  and  dent  free:  a  dented  or  rusty  propane  cylinder  may  be  hazardous,  and  must  be 
professionally inspected before use. 

8. 

Cylinders must be equipped with QCC Type 1 (Quick Closing Coupling) outlet, compatible with the regulator 
supplied. 

9. 

Propane Cylinders must be equipped with a safety relief valve. 

10. 

UL listed Overfill  Protection Device (OPD); This OPD safety feature is  identified by a  unique triangular hand 
wheel. 

Only use cylinders equipped with this type of valve. (Fig. 3)

 

 

 
 
 
 
 
 
 
 
 

 

 

Propane Cylinder Handling: 

 

1. 

Government regulations prohibit shipping full Propane cylinders. You must take your new cylinder to a Propane 
filling station for filling. 

2. 

A  full  cylinder  is  under  high  pressure;  always  handle  with  care,  and  transport  secured  and  in  an  upright 
position. Protect the valve from accidental damage. 

3. 

Do not tip the propane cylinder while connecting it to your grill’s regulator 

4. 

If the cylinder  is tipped  over  while connected to  your grill, shut  it  off and  disconnect it; then have it checked 
before use. 
 

 

Propane Cylinder Storage: 

 

1. 

Disconnected propane cylinders must have a dust cap installed for storage purposes. 

2. 

Store all propane cylinders outdoors in a well-ventilated area. 

3. 

Do not store cylinders in direct sunlight or near a source of heat or combustion.  

4. 

Propane cylinders must be REMOVED from your grill; when the grill is to be stored indoors. 

5. 

Keep all propane tanks out of reach of children. 

6. 

If your grill is stored outside, the propane tank may be left connected to the grill. Turn off propane tank valve 
when grill is not in use.

 

 

Figure 13 

Содержание JPG700-LP























Отзывы: