7
GAS CONVERSION*: (Optional Orifice not included)
1. Remove the Cook Grids, Control Heat Shield, and Burners.
2. Remove the original Orifices (2)
, using a ¼” Socket Wrench, with an extension and 7mm socket (Fig. 3)
3. Lightly coat threads of the replacement Orifices* with Teflon Tape or Gas Fitting Dope.
4. Install the new Orifices into Side Burner (Fig. 4)
5.
Propane; Please ensure that the fuel source is regulated to 11” W.C.
6. Natural Gas; Please ensure that the fuel source is regulated to 4
” W.C.
*NOTE: Contact your dealer for conversion Orifices.
Parts Needed for an LP
Conversion
Parts Needed for a NG
Conversion
JH-141: Orifice size #64 (x2)
JH-142: Orifice size #53 (x 2)
JF-
99: 4” WC NG regulator
TECH TIP
Do NOT over tighten orifice; threads
can easily be broken off!
Figure 3
Figure 4
