To remove door from hinges:
1. Remove the top hinge cover and bottom louver.
2. Using a Phillips screwdriver, remove the screws, then remove top hinge mat
and top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and turn it upside down so that the handle is
on the right. Set the door aside.
4. Using a flat screwdriver, remove the four plug buttons from the screw holes on
the door. Set aside.
5. Using a Phillips screwdriver, remove the magnet baffle and door switch baffle,
then place them on the opposite side at the top of the door.
6. Push the four plug buttons into the spare screw holes.
To replace door on hinges:
1. Using a flat screwdriver, remove the plug buttons from the screw holes
opposite the door hinges, top and bottom. Set aside.
2. Remove the bottom hinge and place it on the opposite side at the bottom of the
door.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and replace the top hinge and top hinge
mat.
5. Replace top hinge cover and bottom louver.
6. Push the plug buttons into the spare screw holes on the top of the cabinet.
Installing the legs or the casters
Four casters are provided with the refrigerator. They are ideal for rolling the unit
from place to place outdoors. If a mobile installation is chosen, you must install the
casters.
Use two or more people when installing or removing casters or legs.
1. Tip unit to the right so there is a 3/4-foot clearance at the left of the unit. Have
someone assist you in tilting the unit, to prevent it from falling on you while
installing the casters or legs.
6
