Jackson Grills BBQ10700, Руководство пользователя

Страница: 25 / 26

24
Troubleshooting
Before Calling for Service
If the unit appears to be malfunctioning, read through the OPERATION section of this manual
first. If the problem persists, check the Troubleshooting Guide below and on the following page.
The problem could be something very simple that can be solved without a service call.
Troubleshooting Guide
Problem Possible Cause Probable Correction
The icemaker is unplugged. Plug the ice maker in.
The fuse is blown. Replace fuse – if this happens, call
for service to check for a short
circuit in the ice maker.
The Power switch is set at
OFF. Turn the Power switch to ON.
The machine
doesn’t operate.
The ice storage bin is full of
ice. Remove some ice, making sure the
ice-full probe is free of ice.
The water supply tap is
turned off. Turn on the water supply tap.
The water doesn't
feed in after the
machine starts.
The water supply line is not
properly connected. Reconnect the water supply line.
Condenser may be dirty. Clean the condenser.
The air flow to the ice maker
may be obstructed. Check the installation.
Machine makes ice,
but ice storage bin
does not fill up with
ice.
The ambient temperature and
water temperature are high,
or machine is near some heat
source.
Check the installation.
A few water drops fall to the
floor when you open the
door to take out ice from
storage bin. Normal condensation on the door or
some water together with ice. Take
care when you take out ice.
Water is leaking
from the unit.
Water supply connection
leaking. Tighten fitting. See “Connecting the
Water Line”.