
Assembly Instructions
Read the ENTIRE
IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth surface.
2. Attach Casters, making sure the Square
Nuts seat inside the Square Openings.
3. Thread Lock Nuts on to Caster bolts, securing tightly.
Square
Opening
Caster
Lock
Nut
Square
Nut
Figure
B
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. Release the Foot Pedal by depressing it
and disengaging the Pedal Lock.
2.
Lifting Tire:
a. With the Lever in the down position, roll Dolly in
front of tire, spread Arms apart, then push Dolly
forward so that Rollers are on either side of tire.
Figure C: Putting Dolly Around Tire
(Lever in Down Position)
b. Move the Lever to the up position, then pump the
Foot Pedal until the tire is just lifted off the ground.
Figure D: Lever in Up Position
WARNING! Be ready for any movement the vehicle
may make when the other tire(s) come off the ground.
Ensure that you have sufficient assistance and
manpower to safely guide and control the vehicle.
3.
Repeat 2. Lifting Tire: for the other
tire(s). Use only in pairs.
WARNING! Stay clear of any sloping areas or entry
ramps, however shallow they may appear. Sufficient
space should be allowed between the side of the
vehicle and an adjacent wall for the vehicle to be
withdrawn from its location in a sideways manner.
4.
Lowering Tire:
a. Move the Lever to the down position, then
depress and release the Foot Pedal.
b. Once tire is on the ground, spread
Arms and remove Dolly.
c. Push arms together, then depress Foot Pedal
all the way and secure with Pedal Lock.
Содержание CD310
Страница 6: ...Assembly Diagram...