Jackco 811 Скачать руководство пользователя страница 2

FOR YOUR SAFETY 

Read all instructions, warnings and cautions carefully. Follow all safety precautions to avoid personal injury 

or property damage during system operation. Jackco cannot be responsible for damage or injury resulting 

from unsafe product use, lack of maintenance or incorrect product and/or system operation. Contact Jackco 

when in doubt as to the safety precautions and operations. 

Failure to comply with the following cautions and warnings could cause equipment damage and personal 

injury.

Ram Load 

Never lift a load that exceeds the capacity of the ram. 

Do not over extend the ram, because it is possible to 

force the plunger out of the top of the ram.

Dust Caps 

When coupler valves are disconnected screw in dust 

cap to keep the oil line clean.

Off-center loads

 

Be careful when load is not centered on ram plunger. 

Pump carefully- IF YOU FEEL THAT YOU HAVE TO 

PUMP UNUSUALLY HARD-STOP. Adjust set-up to 

the off center load is reduced.

Protect your hose

 

Do not drop heavy objects on your hose and avoid 

sharp  kinks.  Provide  proper  clearance  to  avoid 

damage to the hose and couplers.

Heat and fire 

 

Always keep your equipment away from excessive 

heat or fire. 

Содержание 811











Отзывы: