Jackco 66500 Скачать руководство пользователя страница 2

FOR YOUR SAFETY 

• Read these safety instructions carefully and keep this manual in an easy to find place as 

you may need to use it again. 

• Non-compliance with these rules may result in injury or damage to the jack or the vehicle.

• Do not modify the jack in any way.

• Never exceed the rated capacity of the jack.

• This jack is a lifting device only and should never be used to move the vehicle.

• The jack should be supported on a solid and level ground. Never use the jack in a surface 

where it may sink into the ground.

• Ensure that there are no persons inside the vehicle to be lifted. Switch off the engine and 

apply the brake. 

• Position the jack under the manufacturer’s recommended lifting point for the vehicle. Off-

centered loads can slip and accidents may result. 

• During raising and lowering of the load, precautions should be taken to avoid movement 

of the vehicle.  Traffic may cause the raised vehicle to rock during roadside use of the 

jack. 

• Never work under a raised vehicle without supporting it with mechanical/jack stands.  

• Never position any part of your body near the movable parts of the jack. 

• Ensure that there are no persons or obstructions underneath the vehicle prior to lowering. 

• Do not adjust the overload bypass valve under any circumstance.

Use wheel chocks appropriately

2

Содержание 66500









Отзывы: