第 6页共 10 页
4 System parameters setting list
4.1 Parameter mode
1
、
In the standby state ,press
key to enter the parameter modes.
2
、
Press corresponding key
and key
to adjust the corresponding parameter.
3 、
When the parameter values have increased and decreased, parameter interface flash. Short press
key to save the modified
parameters .Long press
key to exit parameter interface, return to standby model.
NO.
Range
Default
Description
P 0 1
200~5000
3800
Free seam velocity
P 0 2
1~100
56
Start sewing slight lift force adjusting
P 0 3
0/1
1
Needle stop position selection (1:up; 0: down)
P 0 4
200~3000
1800
Start back tacking speed
P 0 5
200~3000
1800
End back tacking speed
P 0 6
200~3000
1800
Continuous back sewing speed (W sewing)
P 0 7
200~4000
3700
Multiple seam velocity
P 0 8
0/1
0
Stitching presser foot micro-lift presser foot switch
P 0 9
0/1
0
Soft start switch (0:off; 1: on)
P 1 0
1~9
2
Slow-start stitch count
P 1 1
100~800
400
Slow-start sewing speed
P 1 2
-8~8
2
1/2 multi-function key(2-1/2 4-1/4 8-1/8 -2-(-1/2) -4(-1/4) -8-(-1/8))
P 1 3
200~4000
3200
Maximum speed of reverse stitching
P 1 4
100~800
200
Stitch compensation speed
P 1 5
0~3
1
Button stitching mode (0- close 1- continuous stitching according to the time 2- half stitching 3- one
stitching)
P 1 6
0~9999
0
Thickness detection 0 point value
P 1 7
0~9999
0
Thick material height
P 1 8
0~50
5
A terrier number of threads
P 1 9
200~4000
2000
A terrier speed
P 2 0
0~50
5
Compensation value of over-stalk needle distance
P 2 1
0~50
0
Thickness detection sensitivity
P 2 2
1~4
4
A terrier trajectory
P 2 3
0~4095
1100
Analog quantity of pedal wire cutting position 1(turn off automatic lifting foot pedal wire cutting
position)
P 2 4
0~4095
550
Analog quantity of pedal wire cutting position 2(start automatic lifting foot pedal wire cutting position)
P 2 7
10~100
36
Efforts to cut line
P 2 8
0~359
130
The starting Angle of the clamping line when the front reinforcement joint and the W joint are opened
P 2 9
0~359
320
The clamping end Angle of front reinforcement joint and W joint when opened
P 3 0
0~359
130
The starting Angle of the clip when the front tight seam is opened
P 3 1
0~359
340
The clamping end Angle when the front tight seam is opened
P 3 2
0~100
80
Raise duty cycle gently with presser foot
P 3 3
0~80
55
Clamp wire output
P 3 4
0/1
1
Oil level detection switch
P 3 5
0~3000
800
The speed of the first stitch
P 3 6
0~3000
1500
The speed of the second stitch
P 3 7
0~3000
0
The speed of the third stitch
P 3 8
0~4000
1000
Front reinforcement/W seam first stitch speed limit
