Jack Stonehouse EX03018, Инструкция по эксплуатации

Страница: 17 / 20

Big Noise
The air conditioning is not
placed on a flat surface. Put the air conditioning on a flat and
hard place (to reduce noise).
compressor
does not
work.
Overheat protection starts.
Wait for 3 minutes until the
temperature is lowered, and then
restart the machine.
The remote
control does
not work.
The distance between the
machine and the remote
control is too far.
Let the remote control get close to
the air conditioning, and make sure
that the remote control directly
faces to the direction of the remote
control receiver.
The remote control is not
aligned with the direction of
the remote control receiver.
Batteries are dead. Replace batteries.
Displays 'E1'.
The pipe temperature sensor
is abnormal. Check the pipe temperature sensor
and related circuitry.
Displays 'E2'
The room temperature sensor
is abnormal. Check the room temperature sensor
and related circuitry.
Note: If problems not listed in the table occur or recommended solutions do
not work, please contact the professional service organization.