background image

 POWER JUICER 

ELITE

Assembly/Main Unit

9

Main Unit

STEP 

9:

Insert pusher into chute. Always use 

pusher to feed fruits and vegetables  

into unit. Push gently, never force.  

The blade will do the work.

WARNING:

 

WHEN JUICING 

CHERRIES MAKE SURE THE POWER  

IS OFF AND BLADE HAS STOPPED 

SPINNING BEFORE REMOVING  

THE PUSHER FROM  

THE CHUTE.

STEP 

8:

Lock lid into place by lifting locking  

bar up until it clicks into grooves located 

on both sides of the lid.  

Make sure locking bar is in the full 

upright, locked position.

IMPORTANT:

 

The unit will not start until this bar  

is properly locked in place.

STEP 

7:

Make sure juice spout is  

in the downward position. 

If the juice spout is left  

in the upright position  

the juice will not flow.  

It will stay in the receptacle 

and may overflow from the 

sides.

DOWNWARD POSITION

UPRIGHT POSITION

Assembly/Main Unit

STEP 

4

:

Place blade inside filter, centered  

over screw peg. Using orange  

crescent tool, place its pegs  

into the holes on the blade.  

Turn clockwise while holding  

the filter and receptacle in place  

until tight (as shown). 

STEP 

6:

Place lid with built-in pulp guard on top  

of receptacle, making certain it is snugly 

aligned with the pulp guard facing in  

the opposite direction of the juice spout. 

 

POWER JUICER 

ELITE

   Note:

 Refer to page  

6 for all part names.

Assembly

  

Содержание Elite

















Отзывы: