Cast your screen to TV for a wonderful experience
Regular TV: Using a HDMI cable and an adapter for your phone.
Smart TV: Connect to the Wi-Fi and use airplay or chromecast.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This device and its antenna(s) must
not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:(1) this device may not cause harmful interference,and (2) this device must accept
any interference, including that which may cause undesired operation.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment.
This equipment has been tested and found to be compliant with the limits for a Class B digital
device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and radiates radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception (which can
be determined by turning the equipment off and on) the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
-Consult the dealer or an experienced radio / TV technician for help
FCC
Interference Statement
Casting Calibration
1. If you cast the Jacfit app
to TV, please go to the app
setting and choose “Casting
Calibration”.
2. Watch casting screen and cross when
boxing icon down to the blue area.
3. Adjust the time to make sure your
score achieves at least 12.
JMate Step Coin Mode
1. During “Step Coin Mode”, no
need to connect to the app.
Wear JMate on any wrist, you
are ready to go.
2. When connected, JMate will
upload your data and convert it
to Jcoins once you click “Exchange”
③
.
Total steps
New steps
Total Jcoins
exchanged
Exchange
Jcoins
f
Score
Casting Calibration
/15
Casting Calibration
③
Copyright Aug. 2022