wiJAC-Pxx Wireless Stand Alone Intercom System
Operating Manual
Page 7
5
Connecting the wiJAC™ System
Note:
The
wiJAC-
Pxx
Wireless Intercom System Person to Person consists
of one JA65 Headset Adapter Master and up to four JA64 Headset Adapter
Slaves. Only paired units will operate together (see
section
4
).
A headset is inserted into the jack on the JA64/JA65 Headset Adapter, which is
clipped to the user's belt or clothing.
Headsets are not included.
5.1
wiJAC
™ Set-up and Connection
5.1.1
Insert Batteries
Ensure the batteries for all units are fully charged and installed in the battery
compartment with the correct polarity, and the battery lid is secured (section 6).
5.1.2
Attach JA64 and JA65 Headset Adapters
Insert a headset with a U-174/U or U93A/U type plug into the JA64/JA65 Headset
Adapter jack.
5.1.3
Turn On Paired Adapters and Verify Connection
On the JA65 Headset Adapter Master, turn the VOL knob fully counterclockwise
to minimum. Turn on the JA64 Headset Adapter Slave(s). On all units, the PWR
ON and LOW BATT annunciators will illuminate for two seconds.
•
When a unit is turned on, the PWR ON annunciator will illuminate for 2
seconds, and the unit will start to search for its paired unit.
•
While the unit is searching for its paired unit the PWR ON annunciator will
triple-flash every 1.5 seconds.
•
When the unit is connecting to its paired unit, the annunciator wills double-
flash every 1.5 s until connection is established.
•
After connection, the annunciator will illuminate steady green until the unit is
turned off.
5.1.4
Verify System Audio Operation
Adjust VOX control on the JA64 and JA65 Headset Adapters fully ccw and rotate
the VOL control to achieve a comfortable listening level. Confirm that the
microphone audio is live - all microphone audio is heard in the paired JA64/JA65
phones. Confirm that the audio level increases as the VOL control is rotated
clockwise and decreases as the VOL control is rotated counterclockwise.
Adjust VOX control on the JA64/JA65 Headset Adapters fully clockwise and
confirm that the microphone audio is off. Adjust the Headset Adapter's VOX
control for a comfortable speaking level.
Press the JA64 or JA65 Headset Adapter's ICS PTT button and confirm that
microphone audio is heard in all the paired JA64/JA65 phones.
