JAC S1, Руководство пользователя

Страница: 64 / 77

Replace spark plug
You will find it very easy to replace
the spark plugs with the engine cold.
Replace the spark plugs one by one,
to avoid confusing the wires.
1. Remove the intermediate cover of
the engine swing hood.
2. Clean the dirt deposited around
the spark plug with a piece of clean
cloth, to prevent dirt from entering
the cylinder when the spark plug is
removed.
3. To remove the HV wire, pull out
the connector directly instead of the
cable. Pulling out the cable may
damage the carbon cored conductor.
4. Operate the spanner on the upper
part of the spark plug to remove an
old spark plug, and never damage
the ceramic insulator.
5. Turn the spanner anti-clockwise to
remove an old spark plug.
6. To install a new spark plug, oper
鄄
ate the spanner on the upper part of
the spark plug and never damage
the ceramic insulator.
7. Push the isolated connector onto
the pole, and replace the HV wire.
Check the HV wire for complete
breaking and never drop a HV wire.
Replace air filter
Note:
音 It is recommended to have the
authorized JAC dealer replace the
spark plugs.
Note:
音 The spark plug should be fully
fastened.Excessive tightening may
damage the aluminum alloy cylin
鄄
der head. Also, loose spark plug
can cause overheating of spark
plug and damage the engine.
117
Warning 院
音 Replacement of spark plug
must be done with the engine
cold. An excessively hot engine
may result in scalding.
1. Park the vehicle on a level ground,
apply the parking brake and open
the cooling liquid tank cap.
2. Get a drain container and open
the drain tap of the cooling liquid
tank. After all cooling liquid has been
drained, tighten the drain tap.
3. Refer to relevant instructions for
details about the volume of cooling
system of your vehicle. Add appro
鄄
priate amount of cooling liquid as per
the manufacturer instructions. Now
add demineralized water until it tops
up to the filling port of the cooling liq
鄄
uid tank.
4. Start the engine with the water
tank cap opened. If cooling liquid
needs to be added, add the liquid.
5. Check and close the water tank
and the tank cap, and check that the
drain tap has been completely closed.
Replace spark plug
The spark plug must be replaced as
per the period required in the mainte
鄄
nance schedule, or when the engine
performance requires such replace
鄄
ment. Traces of unqualified spark
plugs installed include engine fire in
鄄
terruption during driving, increased
fuel consumption, and slow acceler
鄄
ation.Use the spark plugs recom 鄄
mended by JAC dealer for replace 鄄
ment of spark plugs. Using other
spark plugs may deteriorate the ve
鄄
hicle performance,interfere with radio
frequency or damage the engine.
Caution:
音 The engine cooling liquid
may damage the protection lay 鄄
er of your vehicle. If it has been
spilled onto the vehicle, wash it
with clean water.
Note:
音 Pure and qualified parts must
be used for replacing spark
plugs.
Maintenance by vehicle owner
116
Warning 院
音 The cooling fan is controlled by
the engine cooling liquid tempera 鄄
ture, and can be operated when
the engine does not run. Take
care about safety when working
near the cooling fan. When the
cooling liquid temperature has re
鄄
duced, the fan will stop operating
automatically. This is normal.