
JA95-060 Audio Controller - Five Transceiver - Expander
Installation and Operating Manual
Rev A
Page 7
For full information on the configuration process, and for installation of ProCS™ on your computer, refer to
the
on the Jupiter Avionics website -
www.jupiteravionics.com/productsoftware.
2.5.1
Configuration Cabling Requirements
To configure the JA95-060, it is necessary to load the
Product Configuration Software ProCS™
onto a Windows-
based computer as described in the
The cables required to configure the JA95-060 are not included with the unit.
Cabling option 1:
Quantity
Description
JA95-060
1
USB A to RS232 9-Pin Cable
CAB-USB-0002
1
Configuration Cable
JA99-001
Cabling option 2:
Quantity
Description
JA95-060
1
USB A Male to RS232 3.5mm Plug
CAB-USB-0006
2.5.2
ProCS™ Setup
The ProCS™ JA95-060 menu item 'ProCS Setup' provides Setup drawings showing the cabling arrangement
for connecting the JA95-060 to a computer running the ProCS™.
2.5.3
Configurable Settings
A standard unit is shipped from the factory with all internal adjustments configured to the default levels. At installation,
it may be desirable to change some of these settings to suit the local operating environment.
Note
: To properly configure the JA95-060, power must be applied to the unit.
Within ProCS™, the configurable settings are grouped together into the following sections:
2.5.3.1
Front Panel Switches
The Front Panel Switches window is used to specify the text for each legend.