JAC A-CLASS, Руководство пользователя

Страница: 77 / 176

After brake is wet
The brake components may get wet
after vehicle passing through water
or washing.
To
restore the normal brake
performance
1.Check whether there is vehicle
behind.
2.Keep the safe driving speed and
ensure there is sufficient space
behind and beside the vehicle.
3.Step the brake intermittently with
care until normal performance is
restored.
Brake overheating
When you drive the vehicle on the
long and steep slope downward,
excessive braking may result in
temporary brake overheating. Enga
-ge the lower gear upon downslope
77
The brake system is designed to
brake the vehicle under any driving
conditions.
This vehicle employs double-circuit
brake system. In the event of failure
of one brake circuit, the other circuit
will stop the vehicle, however, the
braking length will increase and
stepping of brake pedal will require
more force.
Note
Stepping of brake pedal will
require more effort and the brak
-ing length will increase if one
circuit is at fault.
If
the brake pedal travel
increases, it indicates the brake
may require service.
Please have the brake system
Brake
Tips
◎ Do not put your feet on the brake
pedal while driving. Otherwise, it will
accelerate abrasion of brake compo
-nents. In addition, it will result in
brake overheating, prolong braking
length and reduce the safety conse
-quently.
checked and repaired by Enga
-ged After Service Center desig
-nated by JAC immediately.
Tips on driving