background image

U.S.A.
Jabsco
20 Icon
Foothill Ranch, CA 92610-3000
Tel:

949.609.5106

Fax: 949.859.1254

UNITED KINGDOM
Jabsco
Bingley Road, Hoddesdon
Hertfordsire EN11 OBU
Tel:

+44 (0) 1992 450145

Fax: +44 (0) 1992 467132

CANADA
Fluid Products Canada
55 Royal Road
Guelph, Ontario N1H 1T1
Tel:

(519) 821.1900

Fax: (519) 821.2569

JAPAN
NHK Jabsco Company Ltd.
3-21-10, Shin-Yokohama
Kohoku-Ku, Yokohama, 222
Tel:

045.475.8906

Fax: 045.475.8908

GERMANY
Jabsco GmbH
Oststrasse 28
22840 Norderstedt
Tel:

+49-40-53 43 73 -0

Fax: +49-40-53 53 73 -11

© Copyright 2001, ITT Industries

Printed in U.S.A.

All Rights Reserved

Form: 43000-0495

Rev. 7/2001

A. LIMITED WARRANTY:

Jabsco warrants that at the time of shipment, the products
manufactured by Jabsco and sold hereunder shall be in
conformity with applicable written specifications and descriptions
referred to or set forth herein, free from defects in material and
workmanship, merchantable, and suitable for a particular
purpose, provided such is implied by State law under the
circumstances of this sale.

B. WARRANTY ADJUSTMENT:

1.

Jabsco agrees to repair or furnish a replacement for, but not to
remove or install, any product or component thereof which, within
one (1) year from date of purchase, shall upon test and
examination by Jabsco prove defective within the above warranty.
Receipt verifying purchase date is required to obtain adjustment.

2.

Buyer shall notify Jabsco of any defect within this warranty no
later than ninety (90) days after the defect is discovered.

3.

No product will be accepted for return or replacement without the
prior written authorization of Jabsco. Upon such authorization,
and in accordance with instructions from Jabsco, the product will
be returned to Jabsco, shipping charges prepaid by Buyer.
Products returned to Jabsco will be addressed as follows:

JABSCO

1485 Dale Way

Costa Mesa, California 92626-3998

Or to such alternate locations as may be designated 

on the product, its container, or this sheet.

Repair or replacement made under this warranty 

will be shipped prepaid to Buyer.

C. EXCLUSIONS FROM WARRANTY AND

LIMITATION OF LIABILITY:

1.

The foregoing warranty is limited solely as set forth herein and
applies only for the period designated above.

2.

ITT SHALL NOT BE LIABLE FOR ANY LOSS, DAMAGE,
SPECIAL OR CONSEQUENTIAL DAMAGE OF ANY KIND,
WHETHER BASED UPON WARRANTY, CONTRACT,
NEGLIGENCE, OR STRICT LIABILITY ARISING IN
CONNECTION WITH THE SALE, USE, OR REPAIR OF THE
PRODUCT.

3.

THE MAXIMUM LIABILITY OF ITT IN CONNECTION WITH THIS
WARRANTY SHALL NOT IN ANY CASE EXCEED THE
CONTRACT PRICE FOR THE PRODUCT CLAIMED TO BE
DEFECTIVE OR UNSUITABLE.

4.

This warranty does not extend to any product manufactured by
Jabsco which has been subjected to misuse, neglect, accident,
improper installation, or use in violation of instructions furnished
by Jabsco.

5.

This warranty does not extend to or apply to any unit which has
been repaired or altered at any place other than Jabsco’s factory,
or by persons not expressly approved by Jabsco, nor to any unit
the serial number, model number, or identification of which has
been removed, defaced or changed.

6.

Components manufactured by any supplier other than Jabsco
shall bear only that warranty made by the manufacturer of that
product.

7.

This warranty applies to products defined as “consumer products”
by the Consumer Product Warranties Act as from time to time
amended.

D. CONSUMER RIGHTS:

This warranty gives you specific legal rights, and you may have
other rights which vary from state to state. Some states do not
allow exclusion or limitation of damages.

STANDARD WARRANTY:

If the products manufactured and sold

hereunder are not Consumer Products, the warranty extended to
Buyer shall be as set forth in subparagraphs (A), (B), and (C), EXCEPT
THAT ALL EXPRESS OR IMPLIED WARRANTIES OR
MERCHANTABILITY OR SUITABILITY FOR ANY PARTICULAR
PURPOSE ARE EXCLUDED.

ONE YEAR LIMITED WARRANTY

DIMENSIONAL DRAWING

Inches (Millimeters)

Содержание 2620 Series

Страница 1: ...e factory for operation at speeds above those shown For longer pump life operate at lowest possible speeds 4 SELF PRIMING Primes at low or high speeds For vertical lift of 10 feet 3 0mm a minimum of 800 RPM is required Pump will produce suction lift of up to 22 feet 6 7m when wetted BE SURE SUCTION LINES ARE AIRTIGHT OR PUMP WILL NOT SELF PRIME 5 RUNNING DRY Unit depends on liquid pumped for lubri...

Страница 2: ...he seal and press shaft bearing assembly into the bearing bore push on bearing outer race Install bearing retaining ring in retaining ring groove 5 Apply a thin layer of sealant to screw threads and top of cam and install in body Secure with cam screw 6 Lubricate impeller bore with light coat of water pump grease and start impeller into bore with a rotary motion until impeller screw engages slot i...

Страница 3: ...rile 18673 0003 4 Seal Shaft 1 92700 0050 5 Screw Kit 7 each for Cam and End Cover 1 18753 0121 6 Cam 1 2907 0001 7 Body 1 18753 0122 8 Ball Bearing 2 92600 0130 9 Retaining Ring Bearing Positioner 1 18715 0000 10 Retaining Ring Bearing to Body 1 18753 0123 11 Shaft 1 18753 0124 12 Key Shaft Drive 1 11847 0000 13 Slinger 1 879 0000 Service Kit Neoprene 90020 0001 Service Kit Nitrile 90020 0003 ...

Страница 4: ...such alternate locations as may be designated on the product its container or this sheet Repair or replacement made under this warranty will be shipped prepaid to Buyer C EXCLUSIONS FROM WARRANTY AND LIMITATION OF LIABILITY 1 The foregoing warranty is limited solely as set forth herein and applies only for the period designated above 2 ITT SHALL NOT BE LIABLE FOR ANY LOSS DAMAGE SPECIAL OR CONSEQU...

Отзывы: