Drive ‘n’ talk
Drive with caution and avoid losing calls when you’re on the road.
The new Bluetooth speakerphone SP200 by jabra enables you to
make hands-free calls. It connects wirelessly to your phone and
needs no installation – simply clip it onto the visor.
The intuitive controls complement the unique user friendliness
with a large easily accessible answer/end button, a volume wheel
and a dedicated on/off switch. It’s as easy to operate as pulling
down the visor.
The DSP voice processing technology delivers clear sounding
details even in noisy environments. And the outstanding speaker
performance makes every call sound loud and bright.
Stamina is the key word of the battery providing 10 hours of
talk time and 23 days of standby time. It even comes with a
car charger and a USB cable so you can charge both inside and
outside your car.
Hands-free talking while driving simply doesn’t get easier.
Quick start guide
Charge your speakerphone
Insert charger and remove when fully charged and the LED light turns green.
Turning your headset on and off
Slide the on/off switch to turn the speakerphone on or off.
Pairing the speakerphone with your phone
First time pairing:
Turn the speakerphone on and it will automatically be in pairing mode.
The blue LED light will flash rapidly.
Later pairing:
Turn the speakerphone on.
Press and hold the answer/end button (approximately 5 sec)
until blue light flashes rapidly.
Activate Bluetooth on your phone.
Search for Bluetooth devices and select jabra SP200.
Press “OK” on the phone and confirm with PIN code 0000 (4 zeros).
Using your speakerphone
Answer a call
Tap the answer/end button on your speakerphone to answer a call.
End a call
Tap the answer/end button on your speakerphone to end an active call.
Make a call
The call will automatically transfer to your speakerphone. If not tap the
answer/end button.
Reject a call*
Press the answer/end button.
Activate voice dialing*
Press the answer/end button. For best results, record the voice-dialing tag
through your speakerphone.
Redial last number*
Double tap the answer/end button when the speakerphone is on and not
used.
Mute/un-mute
Press the answer/end button to mute an active call. A beep tone plays
during the muted call.
Press the answer/end button to un-mute.
Adjust sound and volume
Scroll the volume wheel to the left or right to adjust the volume.
Sleep mode
When disconnected from the phone, the speakerphone turns off
automatically after 15 minutes. Tap answer/end button to turn the
speakerphone on again.
Place the jabra SP200 in your vehicle
The jabra SP200 sits discreetly and conveniently on the sun visor.
*Phone dependent
1) Answer/end button
Tap button to answer or end call
2) LED light
Shows status of the speaker-
phone
3) Charging socket
Easy charging with USB and CLA
power supply provided.
4) Volume wheel
Scroll the volume wheel to
the left or right to adjust the
volume
5) On/off switch
Slide the on/off switch to turn
the speakerphone on or off.
6) Speaker
For powerful and clear sound
quality
7) Microphone
For optimized sound quality in
receiver end.
1
4
2
5
3
7
6
