Jabra GO 6430, Руководство пользователя

Страница: 10 / 24

10
EN
G
LI
SH
JABRA GO 6430
2. CONNECTING TO A PHONE
This chapter explains how to setup and connect the Jabra GO 6430 to a mobile phone or softphone (PC).
2.1 CHARGING THE HEADSET
To charge the headset, insert the headset into the travel charger and connect the travel charger to a power
source, as illustrated below. The headset LED will change from red to yellow while charging, then to green when
fully charged.
NOTE: The charge time when plugged into a PC or car cigarette-lighter socket is much longer than the charge
time when plugged into the mains power.
PC Mains Power Car Cigarette-lighter Socket
2.2 CONNECT TO MOBILE PHONE USING
BLUETOOTH®
Connecting to a mobile phone with Bluetooth® is available directly between headset and mobile phone.
Connect to a mobile phone using Bluetooth®
1. Turn the headset off: press and hold the headset multi-function button for 4 seconds. The headset LED will
flash 4 times and then the headset will turn off.
2. Put the powered off headset into pairing mode: press and hold the multi-function button for 4 seconds.
The headset LED will turn blue to indicate the headset is in pairing mode.
3. Ensure that Bluetooth® is activated on the mobile phone and put the mobile phone into pairing mode. Refer
to specific mobile phone documentation for details on how to enable pairing mode on the mobile phone.
4. The mobile phone will search for all available Bluetooth® devices. Select the Jabra GO 6430 from the list.
If requested, enter 0000 (four zeros) as the headset pass code.
5. The mobile phone will now attempt to pair to the Jabra GO 6430. If successful, the Jabra GO 6430 and the
mobile phone will be paired and ready to use. If the pairing attempt fails, please try again.
4 sec.
Jabra GO