What you see
What you hear
Status
Flashes every second
Flashes every 3
seconds
When Active Mode
starts: quick series
of
TWO
tones – low
to high pitch
When Standby
Mode starts: quick
series of
TWO
tones – high to low
pitch
Active Mode
• Call in progress
• Up to 4 hours of talk time
Standby Mode
• Waiting for call
• Up to 100 hours of standby time with
m
headset in multi-adapter
STATUS INDICATORS
To answer and end calls with only the headset:
Some phones enable you to answer or end a call by pressing and releasing without having
to touch the phone. For all Nextel phone models (except the
i
1000), the phone’s
Automatic
Answer
feature needs to be activated for this headset feature to work.
For the
BlackBerry 6510
, FreeSpeak's Anwer/End feature has to be turned on.
To turn on FreeSpeak's Answer/End feature:
1) Ensure that the AC power adapter is not connected.
2) Put the headset in the multi-adapter.
3) Use the stylus to press the stylus switch for about 12 seconds.
4) You will then see a number of blinks (long flashes) on the multi-adapter indicator
light which tell you whether this feature is enabled or disabled according to the
following table:
5) Repeat steps 1-4 to switch between enabled and disabled settings.
If you are enabling Answer/End feature for the first time, you should test answering and ending
calls to ensure that your phone supports this feature.
For more information, see “Enhanced Features” at www.jabra.com/fscs.
Calls can be ended by the headset only by waiting for the line to disconnect.
Number of Blinks
Answer/End Feature
Comments
4
5
Enabled
Disabled
Default Setting
--
