![background image](http://html2.mh-extra.com/html/jabra/enhance-select-200/enhance-select-200_user-manual_3061189017.webp)
Inserting the receiver dome into your ear
1. Hang the hearing aid over the
top of your ear.
2. Hold the receiver wire where it
bends and gently place/push
the receiver dome into your ear
canal.
3. Push the dome far enough into
your ear canal so that the wire
rests against your head. You
can check in a mirror.
NOTE:
•
To avoid whistling, ensure that the wire and dome fit correctly into your ear. If you continue to
experience whistling, check the troubleshooting guide for other possible reasons and solutions.
•
If the receiver wire of the hearing aid does not rest against the side of your head, try using a smaller
dome size. (See page 32 for dome replacement). If the hearing aid wire is not resting against the side
of your head, a new receiver length may also be needed (See "Replacing the receivers", page 39).
17
Содержание ENHANCE SELECT 200
Страница 6: ...6...
Страница 59: ...Notes 59...