
30
ENGLISH
Add headset(s) to a conference call
without docking
Up to three additional headsets can be
connected to one base, without the need to
dock the headsets.
1. Undock the primary headset.
2. Power off the additional headset by holding
the
Call
button for 4 seconds.
3. Hold (3 secs) on the base. The conference
LED on the base will flash.
4. Put the additional headset into pairing mode
by holding the
Call
button for 5 seconds until
the status LED on the headset flashes blue.
5. A voice prompt will play in the primary
headset. Press the
Call
button on the
primary headset to accept the additional
headset to the conference. The audio will
now be shared between headsets.
By default, the additional headset will be
muted.
Note: It is possible to use Jabra Engage 75 headsets for
conference calls.