11
english
Jabra CrUISEr2
- Tap Volume Up or Volume Down button to select a new
language .
- Select preferred language and press FM button until the new
language is announced .
Note:
It is possible to turn off the voice announcement function .
When tapping the Volume Up or Volume Down buttons to
select the desired language, the beep tone indicates the voice
announcement function is off . When beep tone is heard press FM
button and the voice announcement function will be off .
USING THE FM TRANSMITTER
The FM transmitter in the speakerphone allows you to transmit
calls and music from your mobile to the car stereo when the
speakerphone and car radio are set to the same frequency .
- Connect your mobile phone and speakerphone .
- Press FM button to enter FM mode . The FM Status Icon will turn
solid red and a FM frequency will be announced .
- Manually turn your radio into the same FM frequency and you
are now ready to transmit calls or music from your phone to
your car stereo .
- The FM transmitter will automatically turn off after 10 minutes
if the function is not used .
CHANGING FM FREQUENCY
When you enter FM mode the speakerphone will always transmit
calls and music on the latest used FM frequency . For the FM
transmitter to work well, a free radio frequency must be found .
a free radio frequency is one that no commercial and public radio
station is broadcasting on . as you drive and change environment
the FM audio quality could potentially be reduced due to frequency
interferences . If sound performance is unsatisfactory it is possible
to select a new FM frequency .
- Enter FM mode .
- Press Volume up button until “Searching” is announced .
- When a new frequency is found and announced, tune your
radio manually into the same FM frequency . The speakerphone
will automatically save the new frequency .
a tap on the Volume up/Volume down button will change the
frequency on your speakerphone by 0 .2 MHz allowing you to fine
tune the signal .
