7
Figure 16
Using the Headset
After you have completed Steps 1 and 2 above, you are now ready to use your
headset.
Answering and Making calls
1. To answer or make a call, put on the headset, remove the handset from its cradle, and
press the mute or the volume button.
2. To end a call, replace the handset in its cradle.
IMPORTANT: Activating the battery from power save mode
1. To save battery power, your headset is designed to reduce power consumption when
the headset is not in use. If your headset has gone for 3 minutes without use, it will
automatically go from full power or “active” mode to “stand-by” mode. It will stay in
stand-by mode for 30 minutes. If the unit is not reactivated within the 30 minute
period, it will automatically drop to “sleep” mode (a further power reduction from the
stand-by mode)
2. A dial tone or sound on the telephone line will automatically reactivate from stand-by
mode. To manually reactivate from stand-by mode, or to reactivate from the sleep
mode, press the mute or volume buttons. (Figure 16)
Adjusting the receive volume
1. To turn the headset sound volume up or down, press the upper (+) or lower (-) part
of the oval volume control button until you find the desired level. When you reach
the maximum or minimum sound levels, you will hear a signal. (Figure 17)
Muting the microphone
1. To talk without the other party hearing you, press the mute button on the outside of
the receiver. When the microphone is muted, you will hear a signal every 3 seconds.
When the mute function is on, you can still hear the other party.
AVS (Advanced Voice Shaping)
1. AVS enhances sound when calls are difficult to hear because of background noise.
With AVS, you optimize the sound of the other person’s voice. To activate,
simultaneously press on the upper and lower part of the volume button. You will
hear a signal when AVS is activated and deactivated. To cancel the setting, just press
the volume button again in the same manner. (Figure 17)
Figure 17