11
Use the settings in the
Audio protection (intellitone)
area of the
settings
tab to set the hearing-protection
level of your headset.
Hearing risk is evaluated as a function of both volume and duration. Therefore, the maximum sound level should
be lowered as the number of hours you spend using the headset increases. The headsets offer a choice of four
protection levels. These features protect your hearing by preventing acoustic shocks and limiting the maximum
noise exposure from the headset during your workday. This system is called Intellitone™, which is only available
from Jabra. All protection levels (including “none”) also feature Peakstop™, which offers protection against
sudden, loud audio spikes.
All three Intellitone levels above (other than “none”) meet and exceed de facto global protection levels, and are
compliant with NIOSH standards and EU health and safety codes of 85 dB(A).
In the Audio protection (Intellitone) area, mark the radio button for the Intellitone level that matches the number
of hours in which you use the headset each day.
If you are using a Lync 2010 you need to switch to Lync 2010 in the
settings
tab as the primary target softphone
for your calls.
important:
Check your local laws or regulations to find out whether a specific protection level is
mandated in your area.
the softbuttons tab
The settings on the Softbuttons tab enable you to assign functions to the soft buttons of the USB controller
(labeled
×
and O, respectively).
Use the drop-down lists here to select from the available functions for each of the two soft buttons. Once configured,
you will be able to trigger these functions by pressing the corresponding button on the USB controller.
Often, you will configure these buttons to control the Bluetooth connection to your mobile phone. *See “Pairing
the Headset with Your Mobile Phone”, below, for details about how to do this.
If you want stereo sound for playing music, your phone needs to support A2DP.
Updating the headset Firmware
Firmware updates can sometimes improve the performance of your headset and/or add new features. Visit the
Jabra web site to find out if firmware updates are available for any of your Jabra products. You will be able to
download the updates from there as they become available.
WArning:
Do not remove the headset from your PC while the firmware is being updated and make
sure your computer will not shut down or go into sleep or standby mode during the process (Should
a disconnection unintentionally occur, please retry from step 1). Ensure the headset is connected
directly to a USB port on the PC.
To apply a firmware update:
1. If you have not already done so, then attach your headset to your computer.
2. If you have not already done so, then download the firmware update from Jabra and save it on your hard disk
or network in a location where you can see it from your computer.
* Check you mobile manual for instruction on how to pair to headsets.
Содержание 2403-700-105 - BIZ 2400 Mono Headband
Страница 1: ...1 Jabra BIZ 2400 USB User manual...