Put on the headset and call a colleague, for example.
Now you can select the desired microphone volume using the
+
/
-
button.
Phone setup with system software version 9.xx and higher:
No settings are required on the phone to use a headset. Following the
correct adaptation of the audio jack, a headset symbol should appear in
the “Phone display”. If the headset symbol does not appear, please check
the following settings:
Menu> Settings> Phone> Audio Jack> Headset/Activate/Select.
Phone setup with system software version below version 9.xx:
Important:
The “Force Headset” function must not be activated on the
phone, as otherwise it will not be possible to accept external calls.
Menu> Settings> Phone> Audio Jack>Force headset OFF
Menu> Settings> Phone> Socket > Activate headset
Dial tone signal transfer/ phone setup:
The dial tone signal in the headset is only transmitted if one of
the following ringtones is used, e.g. Standard/ Classic / Cold River /
Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External
07/04/2021 01:15
https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-
4d6f-90ab-fddf39d431fb
Page 3 of 4
