11
http://zhyk.en.aliaba.com
Distance measurement and start point setting:
When the GPS works properly, the current location will be set as start point by pressing DOWN button and
FUNCTION button altogether. Distance measurement won
’
t work with a start point. Once the start point is
set, the LCD display will show the distance while the bait boat is moving. Please note: do NOT let the bait
boat to go outside of the maximum control range.
Destination storage:
See the section GPS parameter Settings
。
Stored destinations:
The storage module can save up to 8 destinations. If the user wants the bait boat
to go back to the previous feeding point, just check the current location data. When the error is 0.000,
then the bait boat is at the previous destination. Under GPS mode on the LCD display, the error
information is shown on the bottom right corner.
Charging instruction:
The user MUST use the ORIGINAL charger come with the package to charge the
bait boat.
Input:
AC 110V - 240V
Output:
DC 5.5V
The user MUST turn off the switch when charging the bait boat.
Charging indicator:
Red light
–
Charging
Green light - Charged
Red/green flash - maloperation due to turning on the switch, charging interrupted.
Troubleshoot:
If you are having difficulty plugging the socket, please do not push any harder. Slightly twist the plug, it
should solve the problem.
Always equipped with figure
：
Содержание JABO-5CG
Страница 12: ...12 http zhyk en aliaba com...
