UC-230 Remote Control Switch
2/2
MEW51204
Some practical applications of the UC-230
1. Forgotten corridor switch
If it is required to control light from different places (e.g. in a corridor or
passage) and this was “forgotten“ when the electric installation was
designed, the solution is simple. The existing light switch will be
replaced with the UC-230 and up to 8 RC-22 remote controls can be
used to control it from a distance.
2. Bathroom light switch
If you want to control light in a bathroom from a place where ordinary
switch cannot be used for safety reasons (close to the bath tub or
wash basin), you can replace the ordinary switch with a UC-230. An
RC-22 remote control can safely switch it on or off.
3. Outdoor lighting control
When you arrive at your house you can use the RC-11 remote control
(usually used to control a Jablotron car alarm or automobile’s central
locking) to switch on an outdoor light. In order to do this you should
enroll the simultaneous pressing of both RC-11 buttons to the UC-230
in the overswitching mode or in the 2 minutes pulse mode.
4. Automatic corridor light
If you replace the ordinary light switch with the UC-230 one, you can
enroll the JA-60 wireless detectors to it. Usually the JA-60N door
contact is used (triggering the switch if a door is opened) or JA-60P
motion detector (triggering the switch if human monition is detected).
At the same time the detectors can be part of the security system.
When the JA-60P is used with the UC-230, the battery saving feature
must be set to the Energy saving level. You have to press and keep
pressed the tamper switch when inserting batteries in the detector.
This way the sleeping mode will be set to 1 minute.
5. Switching the lights permanently off
You can switch off the UC-230 manually and override the triggering
signals from enrolled JA-60 detectors (e.g. during the daylight). This
status is indicted by the flashing red LED.
6. Wireless doorbell with automatic light switch
The RC-28 doorbell button is usually used with the UC-260 acoustic
indicator creating a wireless doorbell. You can also enroll the RC-28 to
the UC-230 in a pulse mode. When the RC-28 is pressed both the UC-
260 will sound and a light can be switched on. This way you can light
up the entrance hall or indicate a visitor to people with poor hearing.
The triggered light may also prevent intruders entering your house
during your absence.
7. Child switch
If a small child is in the house, sometimes it is difficult for him to switch
on the lights. You can help him if your replace the ordinary switch with
the UC-230 and place RC-22 remote switches on the wall at a desired
height.
Note: Although this product does not contain any harmful materials we
suggest you to return the product to the dealer or directly to the producer after
usage.
