Digital keypad KB-2051
4/3
MCM51200
Страница 1: ...ange small alarm systems without a control panel There is an input loop where detectors can be connected In this mode an exit entrance and an alarm duration timer are programmable Alarm memory and pre alarm signals are available as well The keypad also provides one output OUT terminal which works as a PANIC signal output in the PULSE and LATCH modes The OUT terminal can have different programmable...
Страница 2: ... SET MODE LED and permanent lighting of LED A Programming new codes 1 Enter the user programming level by pressing 5 MASTER CODE 2 To change master code press 0 LED A goes off then enter new 4 digit code confirmed with two short beeps Then you have to enter the new master code once more to confirm that the code is correct If it is entered twice correctly you will hear a confirmation beep and the L...
Страница 3: ...Digital keypad KB 2051 4 3 MCM51200 ...
Страница 4: ...3 Security control panel mode 3 12V TAMP Relay IN ZZ 12 can be used 1 2 4 5 6 7 8 9 0 KB2051 ACCESS CONTROL A B SET MODE Digital Keypad 2 External control of H 906 control panel mode 1 pulse 15V A B SET MODE Digital Keypad REM L4 L3 L2 L1 ARM CHM SIR SIR C NC GND GND NO 12V 15V 15V BS RELAY GND SÍŤ ZAPNUTO HESTIA VYPNUTO ZAPNUTO SERVIS H 906 ALARM SYSTÉM OKAMŽITÁ OKAMŽITÁ ZPOŽDĚNÁ STÁLÁ ZÓNA Digit...
