The JA-115P BUS ceiling PIR motion detector
JA-115P BUS ceiling PIR motion detector
2
MOM53100
Installation accessories
PLV-P-ST
– A mounting pad has been developed as a certified
accessory for ceiling detectors to provide a better arrangement for
the BUS cable in cases where it cannot be elegantly hidden in the
ceiling (e.g. mounting the detector on a concrete ceiling). The pad is not
included in the detector package.
Technical specifications
Power
from the control panel BUS 12 V DC (9 ... 15 V)
Current consumption:
- nominal consumption to calculate backup time
2.8 mA
- maximum consumption for cable selection
30 mA
Recommended installation height
2.5 – 3.5 m above ground level
Detection coverage
360°/11 m (installation height
–
3.5m)
Dimensions
Ø125x40 mm
Weight
120 g
Classification
security grade 2 / environmental class II
(according to EN 50131-1)
Operational environment
indoor general
Operational temperature range
-10 °C to +40 °C
Average operational humidity
75 % RH, non-condensing
Certification body
Trezor Test s.r.o. (no. 3025)
Complies with
EN 50131-1 ed. 2+A1+A2, EN 50131-2-2,
EN 50130-4 ed. 2+A1, EN 55032, EN 50581
JABLOTRON ALARMS a.s. hereby declares that the JA-115P
detector is in compliance with the relevant European Union
harmonisation legislation: Directives No: 2014/35/EU,
2014/30/EU, 2011/65/EU, when used as intended. The original
of the conformity assessment can be found at www.jablotron.com
– the Downloads section.
Note:
Although this product does not contain any harmful
materials we suggest you return the product to the dealer
or directly to the producer after use.
