The JA-113E Bus access module with RFID and keypad
The JA-113E Bus access module with RFID and keypad
2
MLU51512
ON, PG OFF). The change of the status is indicated only
on the specific segment.
5.
Entrance delays / alarms on segment
– the module indicates
entrance delays and alarms on a specific segment.
6.
Wake-up by pressing
– the module optically and acoustically
indicates after the front cover has been opened and also when
a button or segment has been pressed.
Acoustic indication
It can be set regardless of the module’s optical indication and sleep
mode. The module can indicate entrance / exit delays or alarms. During
valid authorization (by user code or RFID card), acoustic indication
of exit delay is supressed. By pressing the indication button the module
is muted permanently. Entrance delays and alarms are indicated until
their times expire, but only if the activation button is not pressed.
Technical specifications
Power
from control panel digital bus (9…15 V)
Current consumption in standby mode
10 mA
Current consumption for cable selection
20 mA
Each additional control segment
0.5mA
RFID frequency
125 kHz
Operating temperature range
-10 to +40 °C
Operational environment according to EN 50131-1
II Indoor general
Classification
Grade 2
according to
EN 50131-1, EN 50131-3,
Also complies with ETSI EN 300330, EN 50130-4, EN 55022 EN 60950-1
Can be operated according to
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the JA-113E
is in a compliance with the relevant Union harmonisation
legislation: Directives No: 2014/53/EU, 2014/35/EU,
2014/30/EU, 2011/65/EU. The original of the conformity
assessment can be found at www.jablotron.com - Section
Downloads.
Note:
Although this product does not contain any harmful
materials we suggest you return the product to the dealer
or directly to the producer after use.
