JABLOTRON
ALARMS
a.s.
Pod
Skalkou
4567/33
46601
Jablonec
n.
Nisou
Czech
Republic
www
.jablotron.com
||
|
JA-14K(R) Security System Control Panel
39 / 72
MNX22101
Installation name
(see the Communication setup tab):
Time
(of event occurrence),
Event
(see table).
Event source
(see the Devices/Name or User/Name tab),
Section
(where the event occurred);
Time
(time and date of sending)
Example of a sent SMS:
JA-10
(installation name)
17:01:10, Delayed alarm
(event time, event)
Door magnet, Ground floor
(detector name, section name)
17:01:25, Instant alarm
(event time, event)
Staircase movement, Upstairs
(detector name, section name)
Time 17:01 22.7.
(time of sending)
9.13 System acoustic indication
Acoustic indication of the system can indicate not only alarm status but also inform about other statuses or
status changes. For an acoustic indication overview see the following tables:
Acoustic indication by keypad / reader:
Sound
Action description
One short beep
Button pressing confirmation
One long beep
Functional button activation, setting a section or switching on a PG
Two long beeps
Functional button deactivation, unsetting a section or switching off a PG
Two long repeated beeps
Unsuccessful setting
Three long beeps
Section unsetting with alarm memory indication
Permanent beeping
Exit delay
Continuous beeping
Entrance delay
Alarm
Acoustic indication by indoor / outdoor sirens:
Sound
Action description
One short beep
Section setting
PG output switching ON
Two short beeps
Section unsetting
PG output switching OFF
Three short beeps
Section unsetting with alarm memory indication
Unsuccessful setting
Permanent rapid beeping
PG status indication – quick beeping
Permanent slow beeping
Exit delay
PG status indication – slow beeping
Continuous squeaking
Entrance delay
PG status indication – permanent squeaking
Whooping
Alarm in a section
Acoustic indication of fire detectors (smoke, temperature, gas):
Sound
Action description
Permanent rapid beeping
Fire alarm
Permanent whooping
9.14 Disabling and blocking options
9.14.1 Disabling
Before you set the system a situation can occur where a device is necessary to be intentionally bypassed from
guarding (for instance a garage because of some construction activity or leaving a dog inside a usually
