10
/ PROTECTION
11
/ PROTECTION
Command
Status
AUXA or AUXB
The relay will close for 1 second
AUXA (B) ON
ON – permanent closing of the relay
(1 can be used instead of ON)
AUXA (B) OFF
OFF – opening the relay
(0 can be used instead of OFF)
AUXA (B) xxM
xxM – is the number of minutes for
which the output relay should be closed
AUXA (B) xxS
xxS – is the number of seconds for
which the output relay should be closed
Control of appliances in the vehicle
The AUX text can be e.g. changed to HEATING text.
The maximum closing time is 60 minutes for all
command types, including ON.
Geofence
– in the car alarm you can set the
GEOFENCE function for the monitoring of leaving /
entering a defined zone. We recommend you to
entrust an installation company with setting up the
service, or use the MyJABLOTRON application.
Blocking / unblocking
– the car alarm supports
blocking a functional circuit of the vehicle, preventing
its use (the function may not be supported in all
vehicle types). This happens automatically after
every setting or in the case of an alarm. You can
also activate permanent blocking with an SMS,
from the voice menu, or from the MyJABLOTRON
application to prevent use of the vehicle even after
proper unlocking. You can use this function e.g.
after your car keys get stolen.
Control of appliances in the vehicle
– through
an additional module the car alarm supports
switching various appliances in the vehicle,
e.g. supplementary heating. Appliances can
be controlled by SMS, from the voice menu,
or by the MyJABLOTRON application.
