JabloCom Essence GDP-06i, Быстрый старт

Страница: 3 / 8

Repair Guide for GDP‐06i
13­10­16
Is the power adaptor visibly mechanically
damaged?
YES OOW – replace power adaptor S60071 . Yes Basic
13­10­17
Is the phone body visibly mechanically
damaged?
YES OOW – replace housing S60130 . Yes Advanced
13­10­18
Are there scratches or other mechanical
damage on the transparent window?
YES OOW – replace window S60027 . No Advanced
13­10­19
Is the SIM holder incomplete or visibly
mechanically damaged?
YES OOW – replace SIM holder S00045 . Yes Advanced
13­10­20
Is the RJ connector for handset
connecտ�on visibly mechanically
damaged?
YES
OOW – replace assembled GDP‐06i main
board S60110 .
Yes Advanced
13­10­90
Did you solve the problem with the
points above?
NO Contact JABLOCOM No
It isn't
possible to
switch on
the phone.
13­11
Can the phone start from adaptor or
battery?
YES Go to line 13­12
13­11­10
Is the output voltage of power adaptor in
range 4.75V to 5.25V?
NO Replace power adaptor S60071 . Yes Basic
13­11­11
Can the phone switch ON from ba냖�ery
a멳�er 30 minutes of charging?
YES NFF – ba냖�ery was discharged. Yes Basic
13­11­12
Is the ba냖�ery voltage a멳�er 30 minutes of
charging in range 2.75V to 4.2V?
NO Replace ba냖�ery pack S60060 . Yes Basic
13­11­13
Does the problem persist even when the
ba냖�ery connector is replaced?
NO
Check / replace the ba냖�ery connector
S60014
Yes Advanced
13­11­14
Can the phone switch ON even a멳�er FW
re‐flash / update?
YES Update phone FW to the latest version. Yes Basic
13­11­15
Can the phone switch ON with another
key rubber?
YES Replace the key rubber S60023 Yes Advanced
13­11­90
Did you solve the problem with the
points above?
NO
Replace assembled GDP‐06i main board
S60110 .
Yes Advanced
Bad LCD
Image
13­12 Is there any problem with LCD image? NO Go to line 13­13
13­12­10
Is the LCD contrast set on value close to 4
(4 visible columns) in the se�ngs menu
(Opտ�ons > Se�ngs > Phone > Display
contrast)?
NO NFF – wrong phone se�ngs. No Basic
13­12­11
Is the flat cable from LCD module
correctly connected in the connector on
main board?
NO
Connect correctly the LCD flat cable to
the connector on main board.
Yes Advanced
13­12­12 Do all dots of the LCD work? NO Replace LCD module S60022 Yes Advanced
13­12­90
Did you solve the problem with the
points above?
NO
Replace assembled GDP‐06i main board
S60110 .
Yes Advanced
Error
Message
13­13 Does an error message appear on LCD? NO Go to line 13­14
13­13­10
Does the error message “Ba냖�ery not
inserted” appear even when another
ba냖�ery is connected?
NO Replace ba냖�ery pack S60060 . Yes Basic
13­13­11
Does the error message “Ba냖�ery not
inserted” appear even when the ba냖�ery
connector is replaced?
NO
Check / replace the ba냖�ery connector
S60014
Yes Advanced
13­13­12
Does the error message sտ�ll appear a멳�er
FW update?
NO Update phone FW to the latest version. Yes Basic
13­13­90
Did you solve the problem with the
points above?
NO
Replace assembled GDP‐06i main board
S60110 .
Yes Advanced
XI.Repair_guide.01.A.docx
3