J5create JUD500, Руководство пользователя

Страница: 243 / 244

ULTRA STATION
使用手冊
40
www.j5create.com ->Contact 客戶聯絡
步驟 3. 如須寄回維修 請詳細準備以下資料
(i) 購買證明發票副本
(ii) 註名產品序號＆產品型號
(iii) 詳細紀錄故障狀況
(iv) 附上個人聯絡方式（姓名、 電話、 地址）
步驟 4. 請依以下優先順序送回
( 1 ) 原購買經銷商 ( 2 ) j5 客戶服務部

j5 create 保固須知
若本產品質量問題而引起的故障與損壞，請即送修; 自購買日期起保固期限內，將提供免費保修服務；新品退換貨務必保
持包裝原貌即配件完整性。

產品保固基準
本產品保固不適用於以下各種情況： 正常的磨損或老化 、自行拆除或進行改裝（不是由 j5 create 或授權之專業人員進
行）;產品之毀損係受不可抗力（天災、火災、水災、地震、雷擊、颱風、龍捲風等） 人為破壞 人為疏失（遺失、未妥善
保管、不正確的安裝等）或其他非正常因素所致者：仿冒品、產品運輸至 j5 過程中丟失或損壞; 因潮濕、腐壞、電壓過高、
工作環境惡劣造成的損壞等。若有上述之情況發生，將收取材料及維修費用。如須維修費用，j5 create 將提供報價單。

維修服務須知
消費者於本公司提供維修服務時，應須先行儲存輩分資料，對任何程式資料或是其他媒體上的資訊，或任何非不在 j5
create 產品保固範圍損壞或遺失，恕不負責。系統、應用軟體、使用者資料的重新安裝以及資料恢復將不包含在 j5
create 的產品保固範圍之內。
產品保固服務說明，j5 create 保有書面修正，解釋說明之權利。
REGULATORY COMPLIANCE
FCC
This equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 Class B.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference, including interference that may cause undesired operation of the device.
CE
This equipment is in compliance with the requirements of the following regulations:
EN 55022 Class B (2006),
EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 (1995+A1:1998+A2:2001)/-3(2006)
C-Tick
This equipment is in compliance with the requirements of the following regulations:
EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.
VCCI
This equipment is in compliance with the requirements of the following regulations:
CISPR22 © IEC: 2005
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or
warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable
for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other
damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical,
including photocopying, recording or information recording and retrieval systems without the expressed written permission of
the manufacture.