J2 625 System Manual
Version 0.1 June15, 2012 (Draft)
10
J2 625 Integrated Touch Screen Computer
I/O Ports
Most I/O ports are accessible in the cable well at the bottom of the unit. Cables are routed
though the cable channel in the swing arm base. (
See Cable Routing
)
I/O Panel
Off / On Button
The Off /On button is located in the cable well,
as shown below
. This button is located
near the side to prevent accidental powering down by the user. The function of the button
can be controlled by the OS. If the J2 625 hangs for some reason it can always be
powered off by holding the Off /On button in for six seconds.
The J2 625 also supports the following: Restore on AC on power loss, Wake On LAN,
and Wake On RTC alarm features to control the system power up. The setting for these
features is controlled from the BIOS.
Off / On Button Location
Hard Disks
One 2.5 inch SATA hard drive (HDD) or a solid state drive (SSD) are standard with the
J2 625. The SATA interface can support data transfer rates up to 3.0 GB/s. The J2 625
offers standard either a 160GB HDD or 16GB SSD, but can be ordered with other size
HDD or SSD as well. See J2 for details.
