J-Tech Digital JTECH-HDBT73, Руководство по эксплуатации

Страница: 4 / 12

The JTECH-HDBT73 is an HDBaseT Extender set consist of transmitter (TX) and
receiver (RX). It distributes HDMI signal via CAT5e/CAT6a cable at 70m/PoC, and
enables IR and RS232 pass-through to control local source device from remote or
far-end display.

1x Transmitter (TX)

1x Receiver (RX)

2x TX Mounting Ears with 2 Screws

2x RX Mounting Ears with 2 Screws

4x TX Plastic Cushions

4x RX Plastic Cushions

1x IR Receiver

1x IR Emitter

2x 3-pin Phoenix Connector

1x Power Adaptor (12VDC, 1A)

1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.

Supports HDMI 1.4 & HDCP 2.2.

Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.

Supports bi-directional 5V IR and RS232 pass-through for long-distance control.

Supports bi-directional PoC for simplified wiring.

Supports CEC.

Features DIP switcher for choosing Control or Update mode.
INTRODUCTION
PACKAGE LIST
1
FEATURES