4/5
Note
:
1.
When the device is powered on both OUT1 and OUT2 will default to output
the source signal from the IN1 port.
2.
The device supports memory function in case of power-down.
3.
AUTO SWITCH: When there is no input signal, empty switching is allowed;
when an input signal detected, the device will switch to the last source
signal automatically.
4.
Ports IN1, IN2, and OUT1 support CEC function.
5.
After comparing the EDID of both output display devices, the JTECH-
8KSW02 will pass the EDID of the lower resolution display.
6.
When the software needs to be updated, it can be updated through the
SERVICE port.
Содержание JTECH-8KSW02
Страница 1: ...JTECH 8KSW02 JTD 648 2 Input HDMI 2 1 Switch with dual outputs ...
Страница 7: ...5 5 6 Application Example ...
Страница 8: ...6 5 ...
