7. AUTO function instruction
①
The product has power off memory function.
1) If the AUTO function is turned off and the product is powered off. When
the product is powered on again and the AUTO function is also turned off.
At this time, the HDMI OUT port will be chosen the input source before
power off.
2) If the AUTO function is turned on and the product is powered off. When
the product is powered on again and the AUTO function is also turned on. At
this time, the HDMI OUT port will be chosen the input source before power
off. But the input source before power off has not input signal, the HDMI
OUT port will be chosen the next input source. For example, the HDMI IN2 is
the input source before power off and it has not input signal, the HDMI OUT
port will be chosen HDMI IN3 port. The order of choosing input source is
IN1>>IN2>>IN3>>IN4>>IN1...etc.
Note:
All input sources are not connected when the product is powered on
again, the HDMI OUT port will be chosen the input source before
power off and not jump.
②
The product is powering on and the AUTO function is turned off.
If the AUTO function is turned off, there is no effect when you plug in or pull
out input source. You can use SW button on front panel or IR remote to
switch input source.
③
The product is powering on and the AUTO function is turned on.
1) The HDMI OUT port will jump the corresponding input source when the
product is connected an input source. For example, The HDMI OUT port
will jump HDMI IN2 when the product is connected the HDMI IN2 source.
2) When you pull out the input source before you chosen, and the HDMI OUT
port will jump the next input source. The order of choosing input source is
IN1>>IN2>>IN3>>IN4>>IN1...etc. If all input sources are pulled out, the HDMI
OUT port is not jump.
5/8
